Switching Grooming Software: Client and Pet Data Migration Checklist

ZibaDesk  ·  18 November 2026  ·  15 min read
Switching Grooming Software: Client and Pet Data Migration Checklist

Switching Grooming Software: Client and Pet Data Migration Checklist

To switch grooming software safely, export everything from your current tool before you cancel, map each field to its new home, import a small sample first, check it against your paper or old-system records, and only then cut over on a quiet day. Ask both vendors, in writing, which export and import formats they support and what migration help they offer. Nothing below assumes an automatic import, a one-click move or zero data loss, because none of those can be promised for every tool.

This guide is for mobile dog groomers and van owners who run on bookings, pet profiles, deposits and reminders, and who want to move without losing the details that make each visit smooth.

TL;DR

Table of Contents

Before you touch any data: decide what you actually need

A migration is the best excuse you will get to clean up. Moving three years of duplicate owners, retired dogs and half-filled notes into a new system just relocates the mess.

Start with a short decision list:

  1. Why are you switching? Name the two or three things the new tool must do that the old one cannot, for example route-aware booking, multi-pet appointments or a travel fee. This becomes your test list later.
  2. What is your cutover window? Pick a date when your calendar is lightest. Avoid the week before a public holiday or school holidays, when bookings peak.
  3. Who owns the job? One person (you, or your admin) runs the migration. Everyone else only needs to know the date and what changes for them.
  4. How long can you keep the old system? Check your contract and notice period. Ideally the old account stays accessible for at least a few weeks after cutover, so you can look things up.

Finally, ask yourself which records are worth carrying over. Active clients and their pets, yes. A dog you groomed once in 2021 and never saw again is a judgement call. You can keep an archive export in a spreadsheet instead of loading it into the live system.

The records to include in your migration

Most groomers think of “clients” and forget the details that sit around them. Use this as your inventory.

Owner records

Pet records

Appointments and money

Settings and templates

Some of these will export as neat columns. Others, like card details held by a payment provider, are often not exportable at all. Treat that as a question for both vendors, not an assumption.

Step 1: Ask both vendors the right questions

Before exporting anything, send the same short message to your current provider and your new one. Keep the answers in writing.

Ask your current vendor:

Ask the new vendor:

If a vendor cannot confirm a format or a feature, treat it as unsupported until they say otherwise. That one habit saves most of the pain later.

If you are considering ZibaDesk, put the same questions to us. ZibaDesk’s pet grooming software keeps each pet’s details on the client record, and one booking can hold several pets, each with a size band such as Small 6 to 10 kg. That structure is what your export needs to map onto, so ask us to confirm which formats we accept and what migration support is available for your situation.

Step 2: Export and secure a clean backup

  1. Export every data type your current tool allows: clients, pets, appointments, services, and any deposit or payment reports.
  2. If a file comes as an Excel workbook, also save a CSV copy of each sheet. CSV is a plain-text format that most import tools read, and it avoids formatting surprises.
  3. Save the original files unchanged in a folder marked as the untouched backup. Do all cleaning on copies.
  4. Take a few screenshots or a PDF print of your busiest week’s calendar and of one complex client profile. You will compare these against the new system.
  5. Store the files somewhere access-controlled, not in a shared inbox or on a phone that others use.

If your export has no separate pet records, pause here. You may need to split a single “pet” column into one row per pet before importing.

Step 3: Clean the data and map the fields

Field mapping means matching each column in your export to the field it should land in. This is where most migrations go wrong, so give it real time.

Build a mapping table

Make a simple two-column sheet: old field on the left, new field on the right. A starting point:

Your export column Where it should land Check
Owner first and last name Client name Are they split or combined?
Mobile Client mobile Same format (04xx xxx xxx)?
Email Client email Any blank or invalid entries?
Address Service address Street, suburb and postcode separated?
Pet name Pet record One row per pet, linked to the right owner?
Weight or size Pet size band Do your weights fit the new size bands?
Behaviour or medical notes Pet notes Did long notes get cut off?
SMS or email opt-out Communication preference Is the opt-out preserved?
Upcoming booking Appointment Right pets, services and price?
Deposit Deposit or credit Is the amount recorded against the right booking?

Common cleaning jobs

Import in a sensible order

Import owners first, then pets, then upcoming appointments. Appointments can only match owners and pets that already exist, so loading them first creates orphans or errors. If the new tool lets you review what it found before saving, use that preview on every file and read it, rather than clicking through.

Owners, pets, then appointments in import order

Step 4: Test with a small sample

Never import everything on the first go. Load 10 to 20 records that cover your trickiest cases, then verify them against your backup.

Illustrative example (no real client data). Suppose your sample set includes:

If the three-dog household lands as three separate pets under one owner, the opt-out survives, the gate code is visible where you will see it on the day, and the deposit matches the booking, your mapping works. If any of those fail, fix the mapping and re-test. It is far cheaper to repeat a 15-record import than a 1,500-record one.

Verification checklist

Send the test reminder and booking to yourself or a colleague, never to a real client.

Mobile-specific checks that general migrations miss

If you travel to clients, an address typo is not a cosmetic problem. It is a wrong turn.

ZibaDesk does not offer live GPS tracking or automatic dispatch, so keep your own process for letting clients know when you are running late.

Step 5: Handle client communication, staff and access

Tell clients early and briefly

Send one message a week or two before cutover. Keep it practical: you are changing booking systems, their existing appointments stay as they are, and they may get a new booking link or reminder format. If your reminders will come from a new number or sender name, say so, so clients do not mistake them for spam.

Do not ask clients to re-enter their details unless you must. The less they have to do, the fewer calls you take.

Train anyone who touches the schedule

A van owner might be the only user, but if you have a second groomer or an admin, give them 30 minutes with the test records before go-live. Walk through booking a multi-pet visit, taking a deposit, editing a pet’s notes and reading the day’s route. Write the three tasks they will do most on a half-page cheat sheet.

Keep the old system as a reference

Do not cancel on cutover day. Keep the old account read-only (or at least accessible) for a few weeks to look up anything that did not carry across. Before you cancel, confirm with that vendor how long your data remains available and how it is deleted afterwards.

Step 6: Plan the cutover

A workable timeline for a small mobile business:

When What happens
2 to 3 weeks before Ask both vendors your questions, export and back up, clean data, build the mapping table
1 to 2 weeks before Import and test the sample, fix mapping, rebuild settings (services, areas, travel fee, reminders)
1 week before Message clients, train staff, run a full import preview
Cutover day Final export of changes since your backup, import the full set, spot-check, switch the booking link and reminders over
First 2 weeks Check each day’s route and reminders, fix gaps, keep the old system for reference
After 2 to 4 weeks Cancel the old subscription once nothing is missing, and archive your export securely

On cutover day, remember the delta: any bookings or client changes made in the old system after your backup. Either freeze changes for a short window or re-enter them by hand.

Privacy and record-keeping: what to check in Australia

Your client list is personal information, and moving it between systems is a good moment to ask how it is stored and who can see it.

Under the Privacy Act 1988, a small business with annual turnover of $3,000,000 or less is generally exempt from the Act’s privacy provisions, with exceptions, including for businesses that disclose personal information about another person for a benefit or collect personal information from someone else to provide a benefit. Proposed reforms may change the small business exemption, so do not treat it as permanent. Whether you are covered depends on your circumstances, so confirm it with your accountant or adviser, and check current guidance from the Office of the Australian Information Commissioner (OAIC).

Regardless of the exemption, good habits are cheap:

Where ZibaDesk fits

If your migration list shows you want route-aware booking, a day route map and multi-pet appointments, ZibaDesk is built for that kind of mobile grooming business. Clients book a visit at their own address, see the travel fee as they type it, and are only offered times that fit the route. Pricing is per business, not per staff member: Free is A$0, Pro is A$19.99 per month, and Ultra is A$39.99 per month (the full plan details are on the pricing page). SMS and WhatsApp reminders, deposits and Stripe card payments are part of the workflow you will be rebuilding and testing.

ZibaDesk

You can run your sample import and route checks in a real account first: start on the free plan or the 14-day Pro trial, with no card required for the trial. Then use this checklist to decide whether the full move makes sense.

FAQ

How long does a grooming software migration take?

For a small mobile business, plan two to three weeks from first export to cutover, with most of the time going into cleaning data and testing a sample. The import itself is often quick. The mapping, settings rebuild and checks are what take the time.

Can I import my appointment history and deposits?

It depends on what your old tool exports and what the new one accepts, so ask both vendors in writing. Past appointments are usually a plain table and often transfer, while deposits and card details are more variable. If deposits cannot be moved, record them against the booking by hand or refund and retake them.

What if my export has no separate pet records?

Split the pet details into one row per pet, linked to the owner, before you import. Do this on a copy of the file. Then test with a multi-dog household to check each dog lands under the right owner.

Do I need to tell clients I am changing software?

A short heads-up is worthwhile, especially if reminders will arrive from a new sender or booking links change. Say that existing appointments are unchanged, and respect anyone who has opted out of messages.

Sources

Start Your 14-Day Free Pro Trial

No credit card required  ·  Cancel anytime